7 pieces of A4 Card stock in total to complete this project.
Stage 1 you will need 4 A4 sheets of card stock for the cartons
score @ 2-3/4"...5-1/2"....8-1/4"...11"
score @ 2-3/4".turn card and score again at the 2-3/4" mark
cut away the 2 small wedges as per picture and cut all the wedges to center score lines
and trim top edges on first and third wedge this will be the top of you cartons
At This Point i decorated as it was flat it was less Fiddly.....
then i assembled the cartons once they were all finished
i punched two holes in the rounded wedges ready for ribbon the other two flaps you just fold in...
Stage 5 Holder base
this is just a piece of card cut to 8x8"
then scored around all sides at 1" and assembled as you would any box
you need 2 pieces of A4 i cut these together so that i would have them both the same
i used a nestie die cut for the opening but a punch would do if your card stock isn't very thick
i ran this through a couple of times
i glued them both together up to the score line see image..........leaving below the score lines open
open out the flaps then i glued both into the holder base in the center
i hope i have remembered it all ....
there is a video on you tube you can watch on making up the cartons but i forgot to save the link sorry
there you have it
one lovely gift idea
thank you for popping by
hugs linda xxx
No comments:
Post a Comment